TECHNICAL DETAILS
-IP68: Full PU encapsulation technology, LED&PCEB fully sealed, no any water immersion risk.
-PU: High-performance, soft to bend and resistant to UV, saltwater, and solvents.
-High output: PU glue with 97.7% light transmission, 120 leds per meter to create homogeneous emitting.
TECHNICAL DETAILS
-High brightness: 1300Im/m.
-Dotless: Uniform light emission, no dark areas.
-Double layer FPC: Balancing the voltage dropping, heat dissipation and flexibility.
TECHNICAL DETAILS
-High efficiency: Efficiency up to 130Lm/w at Ra90,160Lm/w at Ra80.
-High brightness: 2000-6000lm/m.
-Double ended power input: Both ends are equipped with input wires. After the light strip is cut, it can be used directly without the need for additional welding wires.
-Double layer FPC: Balancing the voltage dropping, heat dissipation and flexibility.
TECHNICAL DETAILS
-High efficiency: Efficiency up to 130Lm/w at Ra90,160Lm/w at Ra80.
-High brightness: 2000-6000lm/m.
-Double ended power input: Both ends are equipped with input wires. After the light strip is cut, it can be used directly without the need for additional welding wires.
-Double layer FPC: Balancing the voltage dropping, heat dissipation and flexibility.
TECHNICAL DETAILS
-High efficiency: Efficiency up to 130Lm/w at Ra90,160Lm/w at Ra80.
-High brightness: 2000-6000lm/m.
-Double ended power input: Both ends are equipped with input wires. After the light strip is cut, it can be used directly without the need for additional welding wires.
-Double layer FPC: Balancing the voltage dropping, heat dissipation and flexibility.
TECHNICAL DETAILS
-High efficiency: Efficiency up to 130Lm/w at Ra90,160Lm/w at Ra80.
-High brightness: 2000-6000lm/m.
-Double ended power input: Both ends are equipped with input wires. After the light strip is cut, it can be used directly without the need for additional welding wires.
-Double layer FPC: Balancing the voltage dropping, heat dissipation and flexibility.
TECHNICAL DETAILS
-IK10: Test according to IEC 62262:2002, high impact protection rating IK10(20J), effectively reducing maintenance costs and workload.
-PU: Hard PU diffusor, UV resistant and solvents resistant, no yellowing and no crack.
-IP68: Full PU encapsulation technology, LED&PCB fully sealed, no any water immersion risk.
-Seamless connection: Embedded end cap design, end to end connection without any dotand darkness.
TECHNICAL DETAILS
-IK10: Robust and step resistant, high impact protection rating IK10 effectively reducing maintenance costs and workload.
-PU: Hard PU diffusor, especially for outdoor use, UV resistant and solvents resistant, no yellowing and no crack.
-IP68: 360°PU encapsulation technology, LED&PCB fully sealed, no any water immersion risk.
-Seamless connection: Dot free and uniform emitting surface, end to end connection without any darkness.
TECHNICAL DETAILS
-PU: High performance PU, very soft to bend and recover soon, UV/saltwater/solvents resistant.
-High output: PU glue with 97.7% light transmission, 120 leds per meter to create homogeneous emitting.
-IP68: Full PU encapsulation technology, LED&PCB fully sealed, no any water immersion risk.
-PCB: Unique PCB chain design, effectively protect PCB, allow vertical and horizontal bending and large bending diameter.
Headquarters
Contact: info@elant.net
Address: No. 9 Jinshi 1st Road,
Huicheng District,Huizhou City,
GuangdongProvince, China
Middle East Office
Contact: info@elant.net
Address: Lusail, Qatar
Street: 305
Zone: 69
Building: 142
© 2025 All rights reserved. •Elant